Jks 7101 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Jks 7101 herunter. JKS 7101 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
JKS7101JKS Adjustable Control Arm Installation
Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Upper Control Arms
Part Number: JKS7101
Applications: Wrangler TJ, 1997-06 (rear only)
Grand Cherokee ZJ, 1993-98 (rear only)
Welcome
CONGRATULATIONS on purchasing a set
of new Adjustable Control Arms from JKS Manufacturing.
We are committed to providing you with the best products
available and your satisfaction is our rst priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
SUSPENSION COMPONENTS THAT HAVE RUBBER
BUSHINGS must be tightened with vehicle on level
ground and at normal ride height. The springs must be
supporting the weight of the vehicle when the hard-
ware is torqued; or else ride comfort could be affected
and premature bushing wear may occur.
RUBBER BUSHINGS MUST NEVER BE LUBRICATED,
as doing so will impair performance and longevity.
COMPATIBLE WITH original 4-link suspension con-
guration and vehicle ride height up to 6.0”.
REFER TO FACTORY SERVICE MANUAL for informa-
tion and procedures not covered in these instructions.
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
Tape Measure
Anti-Seize Lubricant
Hydraulic Floor Jack & Jack Stands
Heavy Duty Ratchet Strap *
Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions rst to determine which tools
will be required for your application.
ATTENTION INSTALLER
Install Adjustable Control Arms ONE AT A TIME for easi-
est alignment of mounting hardware.
Installation
1. REMOVE ORIGINAL REAR UPPER
SUSPENSION ARM
Raise and support the vehicle chassis with jack
stands positioned in front of the rear lower suspen-
sion arm brackets.
Raise and support the rear axle housing with a
hydraulic jack. HINT: The axle housing should be
evenly supported, with the suspension at normal
ride height. Do not attempt removal or installa-
tion with the suspension extended, or the axle
drooped, as this will place tension on suspension
arm mounting hardware.
Remove the parking brake cable and ABS wiring
(if equipped) from upper suspension arm.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Gareld Avenue, Coldwater, MI 49036
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - INSTRUCTIONS

JKS7101JKS Adjustable Control Arm InstallationPage 1INSTALLATIONINSTRUCTIONSProduct: Adjustable Upper Control ArmsPart Number: JKS7101 Applications:

Seite 2 - Maintenance

JKS7101JKS Adjustable Control Arm Installation2 Page  Remove the rear upper suspension arm nut and bolt from the axle housing bracket. Retain the ori

Kommentare zu diesen Handbüchern

Keine Kommentare