Jks 2710 Bedienungsanleitung PDF herunterladen

JKS ACOS Pro™ Installation PN 2710 Page 1 of 5

Installation

Instructions

Product: ACOS Pro™

Part Number: PN 2710

Application: Jeep Wrangler JK, 2007+ (front only)

Welcome

CONGRATULATIONS on your purchase

of a new JKS ACOS Pro™ system! At JKS

Manufacturing, we are committed to providing

you with the best products available and your

satisfaction is our first priority.

PLEASE READ these Installation Instructions

carefully, and save them for future reference,

as they contain important installation and

maintenance information.

Before You Begin…

1. Familiarize yourself with the supplied parts

as illustrated in the column to the far right.

2. Thoroughly read all procedures to ensure

you have the tools and experience

necessary to complete this installation.

3. If you are not completely comfortable with

any of the procedures described on the

following pages, do not attempt this

installation. Contact the JKS Technical

Department at (308) 762-6949 to locate a

qualified installation specialist in your area.

Important

MOST VEHICLES REQUIRE additional parts

or modifications to accommodate the

immediate increase in ride height provided by

the ACOS Pro™ system.

DO NOT EXCEED maximum range of

adjustment – see illustration on page 3.

NOT COMPATIBLE with Rancho, TrailMaster,

Rough Country or Fabtech coil springs.

INSTALLATION of this product is not

reversible and should only be performed by an

experienced mechanic or fabricator.

Tools Required

 Hydraulic Floor Jack and Jack Stands

 Metric/Standard Socket Wrench Set

 1/4” Allen Wrench

 Die Grinder with Cut-Off Wheel

(or reciprocating saw)

 File or Deburring Tool

 Emory Cloth (or similar paint stripping tool)

 Rubber or Plastic Mallet *

 Tape Measure

 Spray Lubricant (WD-40 or similar)

 Anti-Seize Lubricant

 Medium Strength Threadlocker

 Satin Black Spray Paint

 Welding Equipment

 Band Saw (or equivalent) *

 16TPI Thread Restoring File (or equivalent) *

 Coil Spring Compressor *

 Factory Service Manual (recommended)

* Asterisk denotes tools that are not required for some

applications. Thoroughly read instructions first to

determine which tools will be required for your

application.

Parts

DESCRIPTION

QTY

Threaded Tube

Adjuster Ring

5/16” x 1-1/4” Cap Bolt

Isolator Pad

Bump Shock Adapter

Bump Shock Nut

Bump Shock Assembly

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - Instructions

JKS ACOS Pro™ Installation PN 2710 Page 1 of 5 Installation Instructions Product: ACOS Pro™ Part Number: PN 2710 Application: Jeep Wrangler JK, 2

Seite 2

JKS ACOS Pro™ Installation PN 2710 Page 2 of 5 Installation  1. REMOVE FRONT COIL SPRINGS  Remove the front coil springs per the factory servi

Seite 3 - DO NOT EXCEED

JKS ACOS Pro™ Installation PN 2710 Page 3 of 5  4. INSTALL ACOS PRO ON PREPARED SPRING RETAINER  Apply a thin coating of anti-seize lubricant

Seite 4 - ATTENTION INSTALLER

JKS ACOS Pro™ Installation PN 2710 Page 4 of 5  Thread Bump Shock Assembly (G) with Bump Shock Nut (F) into Bump Shock Adapter (E) as far as possi

Seite 5 - Maintenance

JKS ACOS Pro™ Installation PN 2710 Page 5 of 5 Operation Ride Height & Bump Shock Adjustments Future ride height and bump shock adjustments shou

Kommentare zu diesen Handbüchern

Keine Kommentare

Jks 2710 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Jks 2710 herunter. JKS 2710 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Jks 2710